AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 216)

41-001343-01 Rev 03, Release 3.2.2 4-53
DSCP Range/VLAN Priority
The following table identifies the default DSCP of protocols.
Configuring Type of Service (ToS)/DSCP (optional)
Use the following procedures to configure ToS/DSCP on the IP phone.
DSCP
Range VLAN Priority
0-7 0
8-15 1
16-23 2
24-31 3
32-39 4
40-47 5
48-55 6
56-63 7
Protocol
Name
Default DSCP
Values in the
ToS Field
sip 26
rtp 46
rtcp 46
Note: ToS/DSCP is enabled by default. The SIP, RTP, and RTCP
parameters show defaults of 26, 46, and 46, respectively. Use the
following procedures to change these settings if required.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Type of Service
(ToS)/DSCP Settings” on page A-47.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.