AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 167)

4-4 41-001343-01 Rev 03, Release 3.2.2
• HTTPS Port
The network administrator chooses which of these parameters (if any) are supplied to the IP
phone by the DHCP server. The administrator must configure the phone manually to provide any
required network parameters not supplied by the DHCP server.
Enabling/Disabling DHCP Using the Configuration Files
Use the following procedure to enable/disable DHCP on the phone using the configuration files.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Network
Settings” on page A-8.