AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 946)

41-001343-01 Rev 03, Release 3.2.2 A-215
• blfxfer - Indicates the softkey is configured to transfer calls AND
configured for BLF on a single key.
• speeddialxfer - Indicates the softkey is configured to transfer calls
AND configured for speeddialing to a specific number.
• speeddialconf - Indicates the softkey is configured to be used as a
speeddial key AND as a conference key.
• callers - Indicates the softkey is set for accessing the Callers List.
• directory - Indicates the softkey is set for accessing the Directory
List.
• icom - Indicates the softkey is set to be used as the Intercom key.
• services - Indicates the softkey is set to be used as the Services key.
• phonelock - Indicates the softkey is set to be used to lock/unlock the
phone.
• paging - Indicates the softkey is set for Group Paging on the phone.
Pressing this key automatically sends a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without
involving SIP signaling.
• empty - Indicates the softkey is configured to force a blank entry on
the IP phone display for a specific softkey. The soft keys are added in
order (from softkey1 to softkey20) after any hard-coded keys have
been added. If a particular soft key is not defined, it is ignored.
Format Text
Default Value none
Range none
line
speeddial
dnd
blf
list ("BLF\List" in the Aastra Web UI)
acd (“Auto call distribution” in the Aastra Web UI)
dcp (“Directed Call Pickup” in the Aastra Web UI)
xml
flash
sprecode
callforward
park
pickup
blfxfer
speeddialxfer
speeddialconf
lcr
callers (“Callers List” in Aastra Web UI)
directory
icom
services
phonelock
paging
empty
Example topsoftkey1 type: line
topsoftkey2 type: speeddial
topsoftkey3 type: lcr
topsoftkey4 type: xml