AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 812)

41-001343-01 Rev 03, Release 3.2.2 A-81
Parameter –
sip backup registrar ip
Backup Registrar Server
(in Web UI)
Aastra Web UI Advanced Settings->Global SIP->
Basic SIP Network Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description The address of the backup registrar (typically, the backup SIP proxy) for
which the IP phone uses to send REGISTER requests if the primary
registrar is unavailable.
A global value of 0.0.0.0 disables backup registration. However, the
phone is still active and you can dial using username@ip address of the
phone.
If the backup registrar IP address is set to 0.0.0.0 for a per-line basis (i.e,
line 1, line 2, etc.), then the backup register request is not sent, the "No
Service" message does not display, and the message waiting indicator
(MWI) does not come on.
Format IP address or fully qualified Domain Name
Default Value 0.0.0.0
Range Not Applicable
Example sip backup registrar ip: 192.168.0.102
Parameter –
sip backup registrar port
Backup Registrar Port
(in Web UI)
Aastra Web UI Advanced Settings->Global SIP->
Basic SIP Network Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description The backup registrar's (typically the backup SIP proxy) port number.
Format Integer
Default Value 0
Range Not Applicable
Example sip backup registrar port: 5060
Parameter –
sip registration period
Registration Period
(in Web UI)
Aastra Web UI Advanced Settings->Global SIP->
Basic SIP Network Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description The requested registration period, in seconds, from the registrar.
Format Integer
Default Value 0
Range 0-2147483647
Example sip registration period: 3600