AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 105)

3-18 41-001343-01 Rev 03, Release 3.2.2
Erasing the Phone’s Local Configuration
You can reset the IP Phone’s local configuration if required. The local configuration is the last
updated configuration you performed using the IP Phone UI or the Aastra Web UI. Performing
this action results in losing all recently user-modified settings. For more information about local
configuration, see Chapter 1, the section, “Configuration File Precedence” on page 1-43 .
Erasing the Phone’s Local Configuration Using the IP Phone UI
IP Phone UI
Step Action
1 Press the Options key on the phone to enter the Options List.
2 Select Administrator Menu and enter your Administrator Password (default is 22222).
3 Select Erase Local Config.
4 For 3-Line LCD Displays::
The “Erase local config?” prompt displays.
Press # to confirm.
For 8 and 11-Line LCD Displays::
The “Erase local config?” prompt displays.
Press Erase to confirm.
For the 6739i:
1
Press the Options key on the phone to enter the Options List.
2 Press the Advanced button. A keyboard displays.
3 Enter the Administrator password using the keyboard, and press <Enter>. Default is “22222”.
4 Press the Reset button. A “Reset Configuration?” prompt displays.
5 Press the Erase Local Cfg. button.
The phone immediately erases the local configuration on the phone and the phone reboots.