AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 663)

6-36 41-001343-01 Rev 03, Release 3.2.2
Configuring the 802.1x Protocol Using the Aastra Web UI
Use the following procedure to configure the 802.1x Protocol on your phone using the Aastra
Web UI.
Aastra Web UI
1 Click on Advanced Settings->802.1x Support.
To configure EAP-MD5:
2
In the “EAP Type” field, select EAP-MD5.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
3 In the “Identify” field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
4 In the “MD5 Password” field, enter a password used for the MD5 authentication of the phone.
For example, password1.
5 Click to save your changes.
To configure EAP-TLS:
1
Click on Advanced Settings->802.1x Support.