AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 368)

41-001343-01 Rev 03, Release 3.2.2 5-91
Use the following parameters to configure preferred line focus using the Aastra Web UI.
Aastra Web UI
1 Click on Basic Settings->Preferences->General.
2 In the “Preferred Line” field, select a preferred line to switch focus to after incoming or outgoing
calls end on the phone. Valid values are:
• None (disables the preferred line focus feature)
• 1 to 9
Default is 1.
For example, if you set the preferred line to “1”, when a call (incoming or outgoing) ends on the
phone (on any line), the phone switches focus back to Line 1.
3 In the “Preferred Line Timeout” field, enter the amount of time, in seconds, that the phone
switches back to the preferred line after a call (incoming or outgoing) ends on the phone, or after a
duration of inactivity on an active line. Default is 0. Valid values are:
• 0 to 999
4 Click to save your changes.