Configuring the sip user parameter dial plan, Limitation – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 296
Advertising
41-001343-01 Rev 03, Release 3.2.2
5-19
Configuring the SIP User Parameter Dial Plan
Use the following procedure to configure the SIP user parameter dial plan.
Limitation
The “sip user parameter dial plan” value is checked AFTER an existing pre-pend dial plan is
checked, so the number that the phone dials will have pre-pend digits also.
Note:
You can configure the “sip user parameter dial plan” parameter on
a global basis only. If it is misconfigured, then the parameter is ignored.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
Advertising