AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 111)

3-24 41-001343-01 Rev 03, Release 3.2.2
Incoming/Outgoing Intercom Calls
The Incoming/Outgoing Intercom Call settings on the IP Phone specify whether the IP
phone or the server is responsible for notifying the recipient that an Intercom call is being
placed. These settings also specify the prefix code for server-side Intercom calls, and specifies
the configuration to use when making the Intercom call .
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
Incoming Intercom Settings (all models)
Auto-Answer
Note: This option can
be set by both Users
and Administrators.
sip allow auto answer Enables or disables the IP phone to allow automatic answering for an
Intercom call. If auto-answer is enabled on the IP phone, the phone
plays a tone to alert the user before answering the intercom call. If
auto-answer is disabled, the phone treats the incoming intercom call
as a normal call.
For more information on this feature, see “Incoming/Outgoing
Intercom with Auto-Answer and Barge In” on page 5-106 .
Microphone Mute
Note: This option can
be set by both Users
and Administrators.
sip intercom mute mic Enables or disables the microphone on the IP phone for Intercom
calls made by the originating caller.
For more information on this feature, see “Incoming/Outgoing
Intercom with Auto-Answer and Barge In” on page 5-106 .
Play Warning Tone
Note: This option can
be set by both Users
and Administrators.
sip intercom warning
tone Enables or disables a warning tone to play when the phone receives
an incoming intercom call on an active line.
For more information on this feature, see “Incoming/Outgoing
Intercom with Auto-Answer and Barge In” on page 5-106 .
Allow Barge In
Note: This option can
be set by both Users
and Administrators.
sip intercom allow barge
in Enable or disables how the phone handles incoming intercom calls
while the phone is on an active call.
For more information on this feature, see “Incoming/Outgoing
Intercom with Auto-Answer and Barge In” on page 5-106 .
Outgoing Intercom Settings (8 and 11-Line LCD phones)
Type
sip intercom type Determines whether the IP phone or the server is responsible for
notifying the recipient that an Intercom call is being placed.
Applicable settings are Phone-Side, Server-Side, OFF.
For more information on this feature, see “Incoming/Outgoing
Intercom with Auto-Answer and Barge In” on page 5-106 .