AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 86)

41-001343-01 Rev 03, Release 3.2.2 2-19
Example 2
The following example illustrates the use of the “ ^ “ and “!” in the configuration files.
aastra.cfg
^sip proxy ip: pbx.company.com
^sip proxy port: 5060
^sip registrar ip: pbx.company.com
^sip registrar port: 5060
<model>.cfg
!sip proxy ip: pbx.aastra.com //this parameter is locked
!sip proxy port: 5062 //this parameter is locked
!sip registrar ip: pbx.aastra.com //this parameter is locked
!sip registrar port: 5062 //this parameter is locked
<mac>.cfg
sip proxy port: 5064 //this parameter is unlocked
sip registrar port: 5064 //this parameter is unlocked
With this configuration, on the Web UI, the "sip proxy ip" and "sip registrar ip” parametres
cannot be modified (they are grayed out), and the value is "pbx.aastra.com" since <model>.cfg has
overwriten aastra.cfg.
The "sip proxy port" and "sip registrar port" parameters can be modified through Web UI
because <mac>.cfg has overwriten <model>.cfg and aastra.cfg. On the Web UI, the value for
these parameters is 5064.