Configuring dnd using the configuration files – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 468
41-001343-01 Rev 03, Release 3.2.2
5-191
Important Notes
• In the Aastra Web UI, the “Account Configuration” page replaces the previous “Call Forward
Settings” page.
• In the IP Phone UI, the new DND key feature now has new menu screens.
•
If you make changes to the configuration for DND via the IP Phone UI, you must refresh
the Aastra Web UI screen to see the changes.
Configuring DND Using the Configuration Files
You use the following parameters to configure DND on the IP Phone:
•
dnd key mode
•
softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type
•
softkeyN states
(optional)
Example
The following is an example of configuring the mode for DND in the configuration files:
dnd key mode:
2
softkey1 type:
dnd
softkey1 states:
idle connected incoming outgoing busy
In the above example, softkey 1 is configured for DND for line 1 only, with a “custom”
configuration. Pressing softkey 1 displays DND screens for which you can customize on the
phone. For specific screens that display in the IP Phone UI, see the section,
on
.
Note:
On the 6739i, you can configure a DND softkey using the IP Phone
UI also. For more information, see the Aastra Model 6739i IP Phone
User Guide.
Note:
If there is no DND key configured or if it is removed, DND is
disabled on the IP Phone.
Configuration Files
To set DND in the configuration files, see Appendix A, the sections:
•
on
.
•
“Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters”
on