AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 198
41-001343-01 Rev 03, Release 3.2.2
4-35
Configuring SIP and TLS Source Ports Using the Aastra Web UI
Use the following procedure to configure SIP and TLS source ports using the Aastra Web UI.
Aastra Web UI
1
Click on Advanced Settings->Global SIP->Advanced SIP Settings.
.
2
The “Local SIP UDP/TCP Port” field has a default value of 5060. Change this value if required to a
value greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict RTP port range in case of a UDP transport.
3
The “Local SIP TLS Port” field has a default value of 5061. Change this value if required to a value
greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict with any TCP ports being used. For example:
WebUI HTTP server on 80/tcp and HTTPS on 443/tcp.
4
Click
to save your changes.
“Local SIP UDP/TCP Port” Parameter
“Local SIP TLS Port” Parameter