AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 107)

3-20 41-001343-01 Rev 03, Release 3.2.2
Basic Settings
An Administrator has access to specific Basic Setting options to configure and manage the IP
Phone in the network. The following sections identify the options available to an Administrator
only, or where indicated, to a User and Administrator. These tables also identify whether you can
configure them using the Aastra Web UI, IP Phone UI, or the configuration files.
General Settings
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
Local Dial Plan sip dial plan A dial plan that describes the number and pattern of digits that a user
dials to reach a particular telephone number. Dial Plan field accepts
up to 512 characters.
For more information on this feature, see “Local Dial Plan” on
page 5-62 .
Send Dial Plan
Terminator sip dial plan terminator Allows you to enable or disable a dial plan terminator. When you
configure the dial plan on the phone to use a dial plan terminator
(such as the pound symbol (#)), the phone waits 4 or 5 seconds after
you pick up the handset or after dialing the number on the keypad
before making the call.
For more information on this feature, see “SIP Dial Plan Terminator”
on page 5-64 .
Digit Timeout sip digit timeout Represents the time, in seconds, to configure the timeout between
consecutive key presses.
For more information on this feature, see. “Digit Timeout” on
page 5-64 .
Park Call
Note: This option can
be set by both Users
and Administrators.
sip lineN park pickup
config The parking of a live call to a specific extension.
This feature on the Basic Preferences screen is available on all
phones EXCEPT the 9143i, and 6753i.
To configure the Park feature on a key, see Chapter 5, the section,
“Park/Pick Up Configuration” on page 5-215 .
Pick Up Parked Call
Note: This option can
be set by both Users
and Administrators.
sip lineN park pickup
config Picking up a parked call at the specified extension.
This feature on the Basic Preferences screen is available on all
phones EXCEPT the 9143i, and 6753i.
To configure the Pickup feature on a key, see Chapter 5, the section,
“Park/Pick Up Configuration” on page 5-215 .
Suppress DTMF
Playback
Note: This option can
be set by both Users
and Administrators.
suppress dtmf playback Enables and disables suppression of DTMF playback when a
number is dialed from the softkeys or programmable keys.
For more information on this feature, see. “Suppressing DTMF
Playback” on page 5-66 .