AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 915)

A-184 41-001343-01 Rev 03, Release 3.2.2
Incoming Intercom Settings
Parameter –
sip intercom line
Line
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Outgoing Intercom Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the line for which the IP phone uses the configuration from,
when making the Intercom call. The IP phone uses the first available line
for physically making the call but uses the configuration from the line you
set for this parameter.
Note: The "sip intercom type" parameter must be set with the Server-Side
option to enable the "sip intercom line" parameter.
Format Integer
Default Value 1
Range Line 1 through 9
Example sip intercom line: 1
Parameter –
sip allow auto answer
Auto-Answer
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Incoming Intercom Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the IP phone to allow automatic answering for an
Intercom call. If auto-answer is enabled on the IP phone, the phone plays
a tone to alert the user before answering the intercom call. If auto-answer
is disabled, the phone treats the incoming intercom call as a normal call.
Format Boolean
Default Value 1 (true)
Range 0 (false - do not allow auto-answer)
1 (true - allow auto-answer)
Example sip allow auto answer: 0