AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 249)

4-86 41-001343-01 Rev 03, Release 3.2.2
4 Enable the “MWI for BLA Account” to enable or disable a BLA configured line to send an MWI
SUBSCRIBE message for the BLA account.
Notes:
1. If you change the setting on this parameter, you must reboot the phone for it to take affect.
2. Both the “sip explicit mwi subscription” and “sip mwi for bla account” parameters must be enabled
in order for the MWI subscription for BLA to occur.
3. The MWI re-subscription for the BLA account uses the value set for the "sip explicit mwi
subscription period" parameter to re-subscribe.
4. Whether or not the "sip mwi for bla account" parameter is enabled, the priority for displaying MWI
does not change.
5 Enable the “Missed Call Summary Subscription” field by checking the check box.
(Disable this field by unchecking the check box. Default is disabled).
This feature allows missed calls that have been redirected by the server, to be incremented in the
missed calls indicator on the phone it was initially directed to.
For more information about this feature, see Chapter 6, the section, “Missed Call Summary
Subscription” on page 6-13 .
Note: The “Missed Call Summary Subscription” feature is configurable on a global or per-line basis.
6 If you enable the “Missed Call Summary Subscription” field, then in the “Missed Call Summary
Subscription Period” field, enter the amount of time, in seconds, that the phone uses the Missed
Calls Summary Subscription feature. Default is 86400.
For more information about this feature, see Chapter 6, the section, “Missed Call Summary
Subscription” on page 6-13 .
Note: The “Missed Call Summary Subscription Period” is configurable on a global basis only.
7 Enable the “AS-Feature-Event Subscription” field by checking the check box.
(Disable this field by unchecking the check box. Default is disabled).
This feature enables or disables the specified line with the BroadSoft’s server-side DND, CFWD, or
ACD features.
For more information about this feature, see Chapter 6, the section, “As-Feature-Event Subscription”
on page 6-16 .
Note: The “AS-Feature-Event Subscription ” feature is configurable on a global or per-line basis.
8 If you enable the “AS-Feature-Event Subscription” field, then in the “AS-Feature-Event
Subscription Period” field, enter the amount of time, in seconds, between resubscribing. If the
phone does not resubscribe in the time specified for this parameter, it loses subscription. Default is
3600.
For more information about this feature, see Chapter 6, the section, “As-Feature-Event Subscription”
on page 6-16 .
Aastra Web UI
Step Action