AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 392)

41-001343-01 Rev 03, Release 3.2.2 5-115
Mapping Redial and Conf Keys as speeddials
You can map the Redial and Conference keys on the IP phone to use as speeddial keys. When the
Redial or Conference key is pressed, the number configured for the key automatically speeddials.
If no number is configured, the Redial and Conference keys return to their original functionality.
You can configure this feature using the configuration files or the Aastra Web UI.
Use the following procedures to set the Redial and Conf keys as speeddial keys.
Note: If you configure the Redial and Conference keys for speeddialing
on the 6757i CT Base Station, the Redial and Conference keys on the
6757i CT handset retain their original functionality. The Redial and
Conference keys on the handset are not configured for speeddial.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Mapping Key
Settings” on page A-195.
Aastra Web UI
1 Click on Basic Settings->Preferences.
2 In the Key Mapping section, enter a number in the "Map Redial Key To" field, that the IP phone will
use to speeddial when the Redial key is pressed.
3 Enter a number in the "Map Conf Key To" field, that the IP phone will use to speeddial when the
Conf Key is pressed.
4 Click to save your changes.