AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 659
6-32
41-001343-01 Rev 03, Release 3.2.2
)
Configuring the 802.1x Protocol Using the IP Phone UI
Use the following procedure to configure the 802.1x Protocol on your phone using the IP Phone
UI.
Configuration Files
For the specific parameters you can set in the configuration files for setting 802.1x support, see Appendix A,
the section,
on
Note:
If configuring 802.1x using the IP Phone UI, the
certificates and private keys must already be configured and
stored on the phone. Use the configuration files or the Aastra
Web UI to load certificates and private keys.
Aastra IP Phone UI
Step Action
1
Press
to enter the Options List.
2
Select Administrator Menu and enter your Administrator password.
3
On 11-Line LCDs:
Select Network Settings->Ethernet & VLAN->802.1x Settings.
On 3-Line LCDs:
Select Network Settings->Ethernet & VLAN->802.1x Settings.
Done -
Ethernet & VLAN Settings
1. LAN Port Link
2. PC Port Link
3. VLAN Settings
4. 802.1x Settings
- Select
3-Line LCDs
11-Line LCDs
10. Ethernet
Next
Enter
4. 802.1x Settings
Next
Enter
& VLAN