AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 108)

41-001343-01 Rev 03, Release 3.2.2 3-21
Display DTMF Digits
Note: This option can
be set by both Users
and Administrators.
display dtmf digits Enables and disables the display of DTMF digits on the IP phone
display during a connected state.
For more information on this feature, see. “Display DTMF Digits” on
page 5-68 .
Call Waiting
Note: This option can
be set by both Users
and Administrators.
call waiting Enable or disables Call Waiting on the IP Phone.
For more information on this feature, see. “Call Waiting” on
page 5-71 .
Play Call Waiting Tone
Note: This option can
be set by both Users
and Administrators.
call waiting tone Enable or disables the playing of a call waiting tone when a caller is
on an active call and a new call comes into the phone.
For more information on this feature, see. “Call Waiting Tone” on
page 5-73 .
Call Waiting Tone Period
Note: This option can
be set by an
Administrator only.
call waiting tone period Specifies the time period, in seconds, that the call waiting tone is
audible on an active call when another call comes in. When enabled,
the call waiting tone plays at regular intervals for the amount of time
set for this parameter. For example, if set to “30” the call waiting tone
plays every 30 seconds. When set to “0”, the call waiting tone is
audible only once on the active call.
For more information on this feature, see
“Call Waiting Tone Period”
on page 5-75 .
Stuttered Dial Tone
Note: This option can
be set by both Users
and Administrators.
stutter disabled Enable or disables the playing of a stuttered dial tone when there is
a message waiting on the IP phone.
For more information on this feature, see. “Stuttered Dial Tone” on
page 5-76 .
XML Beep Support
Note: This option can
be set by both Users
and Administrators.
xml beep notification Enables or disables the playing of a beep to indicate a status on the
phone. When the phone receives a status message, the BEEP
notifies the user that the message is displaying.
For more information on this feature, see “XML Beep Support” on
page 5-77 .
Status Scroll Delay
(seconds)
Note: This option can
be set by both Users
and Administrators.
xml status scroll delay Allows you to set the time delay, in seconds, between the scrolling of
each status message on the phone.
For more information on this feature, see “Status Scroll Delay” on
page 5-78 .
Incoming Call Interrupts
Dialing
Note: This option can
be set by both Users
and Administrators.
incoming call interrupts
dialing Enable or disables how the phone handles incoming calls while the
phone is dialing out. For more information on this feature, see
“Incoming Call Interrupts Dialing” on page 5-79 .
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description