Ip phone ui – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 238
41-001343-01 Rev 03, Release 3.2.2
4-75
Note:
You can set global configuration only using the IP Phone UI.
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select Administrator Menu.
3
Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4
Select SIP Settings.
5
Select User Name to enter the username that appears in the name field of the SIP URI. This user
name is also used for registering the phone at the registrar.
Note: The IP phones allow usernames containing dots (“.”). You can also enter the same user name
for different registrar and proxy IP addresses.
6
Press Done to save the changes.
7
Select Display Name to enter the name used in the display name field of the "From SIP" header
field.
8
Press Done to save the changes.
9
Select Screen Name and enter the name to display on the idle screen.
10
Press Done to save the changes.
11
Select Authentication Name to enter the authorization name used in the username field of the
Authorization header field of the SIP REGISTER request.
12
Press Done to save the changes.
13
Select Password to enter the password used to register the IP phone with the SIP proxy.
Note: The IP phones accept numeric passwords only.
14
Press Done (3 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
15
Select Restart.
For the 6739i:
1
Press the Options key on the phone to enter the Options List.
2
Press Advanced. A keyboard displays.
3
Enter the Administrator password using the keyboard. Default is “22222”.
4
Press SIP.
5
Press User Name and enter the username that appears in the name field of the SIP URI. This user
name is also used for registering the phone at the registrar.
Note: The IP phones allow usernames containing dots (“.”). You can also enter the same user name
for different registrar and proxy IP addresses.
6
Press
to scroll to the next screen.
7
Press Display Name and enter the name used in the display name field of the "From SIP" header.
8
Press Screen Name and enter the name to display on the idle screen.