Ring tones and tone sets, Ring tones, Ring tone settings table – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 394: Ring tones and tone sets -117
![background image](/manuals/253368/394/background.png)
41-001343-01 Rev 03, Release 3.2.2
5-117
Ring Tones and Tone Sets
You can configure ring tones and ring tone sets on the IP phones.
Ring Tones
There are several distinct ring tones a user or administrator can select from to set on the IP phones.
You can enable/disable these ring tones on a global basis or on a per-line basis.
The following table identifies the valid settings and default values for each type of configuration
method.
Ring Tone Settings Table
Configuration Method
Valid Values
Default Value
Configuration Files
Global:
0 (Tone1)
1 (Tone 2)
2 (Tone 3)
3 (Tone 4)
4 (Tone 5)
5 (Silent)
Per-Line:
-1 (global)
0 (Tone1)
1 (Tone 2)
2 (Tone 3)
3 (Tone 4)
4 (Tone 5)
5 (Silent)
Global:
0 (tone 1)
Per-Line:
-1 (global)
IP Phone UI
Global:
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Global:
Tone 1
Configuration Method
Valid Values
Default Value
Aastra Web UI
Global:
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
Per-Line:
Global
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
Global:
Tone 1
Per-Line:
Global