AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 759)

A-28 41-001343-01 Rev 03, Release 3.2.2
Parameter –
auto resync time
Time (24-hour)
(in Web UI)
Aastra Web UI Advanced Settings->Configuration Server->
Auto-Resync
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the time of day in a 24-hour period for the IP phone to be
automatically updated. This parameter works with TFTP, FTP, HTTP and
HTTPS servers.
Notes:
1. The resync time is based on the local time of the IP phone.
2. The value of 00:00 is 12:00 A.M.
3. When selecting a value for this parameter in the Aastra Web UI, the
values are in 30-minute increments only.
4. When entering a value for this parameter using the configuration files,
the value can be entered using minute values from 00 to 59 (for
example, the auto resync time can be entered as 02:56).
5. Auto-Resync adds up to 15 minutes random time to the configured
time. For example, if the auto resync time parameter is set to 02:00,
the event takes place any time between 02:00 and 02:15.
6. When the language on the phone is set to French or Spanish, you must
enter the time in the format "00h00" (configuration files only).
Format hh:mm
00h00 (for French and Spanish configuration files)
Default Value Aastra Web UI
00:00
Configuration Files
00:00
Range Aastra Web UI
00:00 to 23:30 (in 30 minute increments)
Configuration Files
hh = 00 to 23
mm = 00 to 59
Example auto resync time: 03:24
Parameter–
auto resync max delay
Maximum Delay
(in Web UI)
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Aastra Web UI Advanced Settings->Configuration Server->
Auto-Resync
Description Specifies the maximum time, in minutes, the phone waits past the scheduled
time before starting a checksync.
Format Integer
Default Value 15
Range 0-1439
Example auto resync max delay: 20