AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 434)

41-001343-01 Rev 03, Release 3.2.2 5-157
Enabling/Disabling Ability to Add or Edit a speeddial Key
The IP Phones allow you to set a parameter, “speeddial edit” using the configuration files that
allows you to enable or disable the ability to add a speeddial key or edit a speeddial key from the
IP Phone UI. Disabling this parameter prevents a user from adding or editing a speeddial key.
The default for this parameter is enabled, allowing you to create and edit speeddial keys on the
phone using the Press-and-hold feature, softkeys, programmable keys, expansion module keys and
key pad, speeddial menu in the IP Phone UI, and the SAVE TO key.
If this parameter is set to disabled, it blocks the user from using any of the features on the phone to
create or edit a speeddial key.
Enabling/Disabling the Ability to Add or Edit a speeddial Key Using the
Configuration Files
Use the following procedure to enable/disable the ability to add and edit a speeddial key.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Enabling/Disabling Ability to Add/Edit Speeddial Keys” on page A-234.