AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 369)

5-92 41-001343-01 Rev 03, Release 3.2.2
Goodbye Key Cancels Incoming Call
You can configure the Goodbye key to drop active calls or ignore incoming calls using the
“goodbye cancels incoming call” parameter. This parameter controls the behavior of the
goodbye key when the phone is on an active call and a second call is presented to the phone.
How it Works
When you enable this parameter (1 = enable in the configuration files), which is the default, the
Goodbye key rejects the incoming call. When you disable this parameter (0 = disable in the
configuration files), the Goodbye key hangs up the active call.
For 8 and 11-line LCD phones:
If you enable this parameter, and the phone receives another call when an active call is already
present, the phone displays softkey 1 as “answer” and softkey 2 as “ignore”. You can press the
required softkey as applicable.
For 3-line LCD phones:
If you enable this parameter, and the phone receives another call when an active call is already
present, the “ignore” option only displays in the LCD window. The phone ignores the incoming
call. If you press the DOWN arrow key, the phone answers the incoming call.
You can set this parameter using the configuration files or the Aastra Web UI.
Configuring the Goodbye Key to Cancel Incoming Calls
Use the following procedures to configure the behavior of the Goodbye Key on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling the behavior of the
Goodbye Key, see Appendix A, the section,
“Incoming Call Interrupts Dialing Setting” on page A-152.