Reference – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 575
5-298
41-001343-01 Rev 03, Release 3.2.2
• AastraIPPhoneStatus object (via XML object; see the Aastra XML Developer’s Guide)
• xml beep notification (via configuration files)
• XML Beep Support (via the Aastra Web UI)
Enabling the beep is an indication to the phone to sound a beep when it receives an
AastraIPPhoneStatus object. If you disable the beep, or no AastraIPPhoneStatus object appears
in the status message, then the default behavior is no beep is heard when the object arrives to the
phone.
The value set in the configuration files and Aastra Web UI override the attribute you specify for
the AastraIPPhoneStatus object.
For example, if the AastraIPPhoneStatus object has the attribute of Beep=”yes”, and you
uncheck (disable) the “XML Beep Support” in the Aastra Web UI, the phone does not beep
when it receives an AastraIPPhoneStatus object.
Setting the BEEP option in the configuration files and the Aastra Web UI applies to the phone
immediately.
Reference
For information about enabling/disabling the XML beep in the Aastra Web UI, see
on