AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 945)

A-214 41-001343-01 Rev 03, Release 3.2.2
Top Softkey Settings for 6757i and 6757i CT
Parameter –
topsoftkeyN type
Top Softkeys->Type
(in Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description The type of softkey to configure. Valid types are:
•
none - Indicates softkey is disabled.
• line - Indicates softkey is configured for line use.
• speeddial - Indicates softkey is configured for speeddial use.
You can configure a softkey to speeddial a specific number by
pressing that softkey. Optionally, you can also configure a speeddial
key to dial prefix numbers. With this option, the prefix numbers
automatically dial when you press the softkey, and the phone waits
for you to enter the remaining numbers to dial out.
Note: When there is an active call, the speeddial keys send DTMF
digits through the active voice path. To dial out, you have to first put
the active call on hold and then press the speeddial key.
• dnd - Indicates softkey is configured for do not disturb on the phone.
This option is "Do Not Disturb" in the Aastra Web UI).
• blf - Indicates softkey is configured for Busy Lamp Field (BLF) use.
User can dial out on a BLF configured key.
• list - Indicates softkey is configured for BLF list use. (This option is
BLF/List in the Aastra Web UI). User can dial out on a BLF List
configured key. You can also use the
“BLF List URI” parameter to
specify a URI for the phone to access for the BLF List.
• acd - (for Sylantro Servers only) Indicates the programmable key is
configured for auto call distribution (called “Auto call distribution” in
the Aastra Web UI). The ACD feature allows the Sylantro server to
distribute calls from a queue to registered IP phone users (agents).
• dcp - (for Sylantro Servers only) Indicates the programmable key is
configured for either directed call pickup or group call pickup (called
“Directed Call Pickup” in the Aastra Web UI). The Directed Call
Pickup/Group Call Pickup feature allows you to intercept or pickup a
call on a monitored extension or a group of monitored extensions.
• xml - Indicates the softkey is configured to accept an XML application
for accessing customized XML services. You can also specify an XML
softkey URL for this option.
• flash - Indicates the softkey is set to generate a flash event when it is
pressed, or a feature key is pressed on the CT handsets. The IP
phone generates flash events only when a call is connected and there
is an active RTP stream (for example, when the call is not on hold).
• sprecode - Indicates the softkey is configured to automatically
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
• park - Indicates the softkey is configured to park incoming calls when
pressed.
• pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
• lcr - Indicates the softkey is configured for “last call return” when
pressed.
• callforward - Indicates the softkey is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode must be
enabled to use this softkey. “Account” mode is the default.