AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 271)

4-108 41-001343-01 Rev 03, Release 3.2.2
9
(Cont’d)
Reference
For more information on configuring the HTTPS security method, HTTP to HTTPS redirect, and
HTTPS server blocking for HTTP XML POSTs, see the section,
“HTTPS Client/Server
Configuration” on page 4-41 .
10 Press Done or Set repeatedly until the session prompts you to restart the IP phone to apply the
configuration settings.
11 Select Restart.
IP Phone UI
Step Action
HTTPS Settings (Continued)
- Select HTTPS Server.
- Select HTTP->HTTPS.
- For 3-Line LCD Displays::
Press Change to select “Do not redirect”or “Redirect”. Default is “Do not redirect”.
Enabling this feature redirects the HTTP protocol to HTTPS.
Press Set.
- For 8 and 11-Line LCD Displays::
Press Change to select “Yes” and redirect HTTP to HTTPS. Select “No” to not direct HTTPS
to HTTPS, Default is “No”. Enabling this feature redirects the HTTP protocol to HTTPS.
Press Done.
- Select XML HTTP POSTs.
- For 3-Line LCD Displays::
Press Change to select “Do not block” or “Block”.
Enabling this feature blocks XML HTTP POSTs from the IP Phone.
- For 8 and 11-Line LCD Displays::
Press Change to select “Yes” and block XML HTTP Posts. Select “No” to unblock XML
HTTP Posts. Default is “No”. Enabling this feature blocks XML HTTP POSTs from the IP
Phone.