Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 133)

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 133
Bulletin 280E/281E/284E Programmable Parameters Chapter 7
Bulletin 284E Basic Status Group
Hdw Inputs
This parameter provides status of
hardware inputs.
Parameter Number 1
Access Rule GET
Data Type WORD
Group Basic Status
Units —
Minimum Value 0
Maximum Value 15
Default Value 0
Bit
Function
3 2 1 0
— — — X In0
— — X — In1
— X — — In2
X — — — In3