Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual User Manual
Page 54
54
Rockwell Automation Publication 280E-UM001B-EN-P - July 2012
Chapter 2 Installation and Wiring
Figure 33 - External Connections for Motor Connector – Bulletin 280E/281E - 10 Hp (M35)
at 480V AC
Figure 34 - External Connections for Brake Contactor Connector (M25)
Figure 35 - External Connections for Dynamic Brake Connection (M22)
Figure 36 - Incoming Control Power (M22) – 24V DC Only
Pin 1 - T1 (black)
Pin 2 - Ground (green/yellow)
Pin 3 - T3 (red)
Pin 4 - T2 (white)
Pin 1 - L1 (black)
Pin 2 - Ground (green/yellow)
Pin 3 - L2 (white)
Pin 1 - Ground (green/yellow)
Pin 2 - BR+ (black)
Pin 3 - BR– (white)
Pin 1 - +24V DC unswitched (A3/red)
Pin 2 - Common (A2/black)
Pin 3 - PE (green)
Pin 4 - Not used (blank)
Pin 5 - +24V DC switched (A1/blue)
Pin 6 - Not used (white)