Auto-generated tags – Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual User Manual
Page 94
94
Rockwell Automation Publication 280E-UM001B-EN-P - July 2012
Chapter 5 Adding an ArmorStart to RSLogix 5000
Auto-Generated Tags
After you install and configure the AOP, the controller tags are generated. The
tags names are descriptive and automatically generated. This greatly simplifies
programming. The figure below shows an example of the auto-generated tags
for ArmorStart
.
The following tables provide more clarification regarding the Produce and
Consume assemblies and how they correlate with the auto-generated names.
Using an AOP the data in the Consumed and Produced Assemblies are
automatically created as descriptive tag names. To drive this point home
we've highlighted a few of the commands to demonstrate the AOP tag
alignment to the Consumed and Produced Assemblies in the following tables.