Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 291)

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 291
CIP Information Appendix B
The following services will be implemented for the Parameter Object.
Parameter Group Object CLASS CODE 0x0010
The following class attributes will be supported for the Parameter Object.
The following instance attributes will be supported for all parameter group
instances.
The following common services will be implemented for the Parameter Group
Object.
Service Code
Implemented for:
Service Name Class Instance
0x01 No Yes Get_Attribute_All
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
0x4b No Yes Get_Enum_String
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT —
2 Get Max Instance UINT —
Attribute ID Access Rule Name Data Type Value
1 Get Group Name String SHORT_STRING —
2 Get Number of Members UINT —
3 Get 1st Parameter UINT —
4 Get 2nd Parameter UINT —
n Get Nth Parameter UINT —
Service Code
Implemented for:
Service Name Class Instance
0x01 Yes Yes Get_Attribute_All
0x0E Yes Yes Get_Attribute_Single