Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual User Manual
Page 219
Advertising
![background image](/manuals/578181/219/background.png)
Rockwell Automation Publication 280E-UM001B-EN-P - July 2012
219
Diagnostics Chapter 9
c. Verify the tag data type and options with the figure below and
click OK.
d. Bring up the Configuration Dialog screen by clicking the box next to
the tag name AS_Reset.
e. Select CIP Generic from the Message Type drop-down menu and
Custom
from the Service Type drop-down menu.
Advertising
This manual is related to the following products: