Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 140)

140 Rockwell Automation Publication 280E-UM001B-EN-P – July 2012
Chapter 7 Bulletin 280E/281E/284E Programmable Parameters
Starter Enclosure
Bit 0 = IP67
Bit 1 = Reserved
Bit 2 = Sil3/Cat4
Bit 3…15 = Reserved
Parameter Number 59
Access Rule GET
Data Type WORD
Group Basic Status
Units —
Minimum Value 0
Maximum Value —
Default Value 0
Starter Options
Bit 0 = Full Keypad
Bit 1 = Reserved
Bit 2 = Source Brake
Bit 3 = Reserved
Bit 4 = Dynamic Brake
Bit 5 = Output Contactor
Bit 6 = EMI Filter
Bit 7 = Reserved
Bit 8 = Fused DynBrake
Bit 9…15 = Reserved
Parameter Number 60
Access Rule GET
Data Type WORD
Group Basic Status
Units —
Minimum Value 0
Maximum Value 66535
Default Value 0