Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 304)

304 Rockwell Automation Publication 280E-UM001B-EN-P – July 2012
Appendix B CIP Information
TCP/IP Interface Object CLASS CODE 0x00F5
The following class attributes will be supported.
One instance of the TCP/IP Interface Object will be supported with the
following instance attributes.
The following common services will be implemented for the TCP/IP Interface
Object.
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
Attribute ID Access Rule Name Data Type Value
1 Get Status DWORD —
2 Get Configuration Capability DWORD 0x00000014
3 Get/Set Configuration Control DWORD
0 = Configuration from NVS
2 = Configuration from DHCP
4 Get Physical Link Object
Struct of
UINT
Padded EPATH
2 words
NULL Enet Link Object Instance
5 Get/Set Interface Configuration
Struct of
UDINT
UDINT
UDINT
UDINT
UDINT
STRING
IP Address
Network Mask
Gateway Address
Primary DNS
Secondary DNS
Default Domain Name for not fully qualified host names
6 Get/Set Host Name STRING —
8 Get/Set TTL Value USINT Time to Live value for EtherNet/IP multicast packets
9 Get/Set Multicast Config
Struct of
USINT
USINT
UINT
UDINT
Allocation Control
Reserved
Number of multicast addresses to allocate (1…4)
Multicast starting address.
Service Code
Implemented for:
Service Name Class Instance
No Yes Get_Attribute_All
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single