Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 281)

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 281
CIP Information Appendix B
Assembly Object CLASS CODE 0x0004
The following class attributes are supported for the Assembly Object:
The following static Assembly instance attributes will be supported for each
Assembly instance.
The following services will be implemented for the Assembly Object.
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
Attribute ID Access Rule Name Data Type Value
1 Get Number of Members in Member List UINT —
2 Get
Member List Array of STRUCT Array of CIP paths
Member Data Description UINT Size of Member Data in bits
Member Path Size UINT Size of Member EPATA in bytes
Member Path
Packed
EPATH
Logically encoded member name
3 Conditional Data Array of BYTE —
4 Get Size UINT Number of bytes in attribute 3
100 Get Name String STRING —
Service Code
Implemented for:
Service Name Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
0x18 No Yes Get_Member