Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 91)

Rockwell Automation Publication 280E-UM001B-EN-P - July 2012 91
Adding an ArmorStart to RSLogix 5000 Chapter 5
Internet Protocol Tab
Click on the Internet Protocol tab to display the following:
If the IP address was set up using the Rotary Network Address Switches, default
settings for the IP would already be established and you will not be able to make
any changes in this tab. In most cases, you would not need to make any changes in
this tab and it will only display the current IP Settings Configuration.