Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual - Manual (Page 302)

302 Rockwell Automation Publication 280E-UM001B-EN-P – July 2012
Appendix B CIP Information
A single instance of the DPI Alarm Object will be supported with the following
instance attributes.
The following services are supported.
The table below lists Warning Codes, Warning Text, and Warning Help Strings
that do not match the fault text.
Attribute ID Access Rule Name Data Type Value
0 Get Full/All Info Struct of: —
— — Alarm Code UINT —
— — Alarm Source Struct of: —
— — DPI Port Number USINT —
— — Device Object Instance USINT —
— — Alarm Text STRING —
— — Alarm Time Stamp Struct of: —
— — Timer Value ULINT —
— — Timer Descriptor WORD —
— — Help Object Instance USINT —
— — Alarm Data — —
1 Get Basic Info Struct of: —
— — Alarm Code UINT —
— — Alarm Source Struct of: —
— — DPI Port Number USINT —
— — Device Object Instance USINT —
— — Alarm Time Stamp Struct of: —
— — Timer Value ULINT —
— — Timer Descriptor WORD —
3 Get Help Text STRING —
Service Code
Implemented for:
Service Name Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 Yes No Set_Attribute_Single
Fault Code Fault Text Help Text
101 IP67/4X Mismatch
The Base enclosure type does not match the Control Module
enclosure type.
102 DB Terminal A warning has been detected with the operation of the Dynamic Brake.