Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual User Manual
Page 86
Advertising
![background image](/manuals/578181/86/background.png)
86
Rockwell Automation Publication 280E-UM001B-EN-P - July 2012
Chapter 5 Adding an ArmorStart to RSLogix 5000
1.
If a controller path is not set in the field shown below, you must first set a
path before going online with the controller. Click on the
RSwho
button shown below.
2.
Expand and browse the AB_ETHIP-1, Ethernet driver.
3.
Select the Controller path. Then click Go Online.
Advertising
This manual is related to the following products: