Save the relation list – Rockwell Automation 284E ArmorStart with EtherNet/IP - User Manual User Manual
Page 72
Advertising
![background image](/manuals/578181/72/background.png)
72
Rockwell Automation Publication 280E-UM001B-EN-P - July 2012
Chapter 4 Product Commissioning
Figure 54 - Enable DHCP Button
Save the Relation List
You can save the Relation List to use later. To save the Relation List perform the
following steps:
1.
Select Save As... from the File menu.
Figure 55 - Save the Relation List
You will see the Save As Dialog.
Advertising
This manual is related to the following products: