PLANET WGS3-24240 - Manual (Page 108)

User’s Manual of WGS3-24000 / WGS3-24240
108
4.2.12.3 Server Configuration
Figure 4-2-61 SNTP Server Configuration
Configurable Data
Object Description
• Server Specifies all the existing Server Addresses along with an additional option
"Create". When the user selects "Create" another text box "Address" appears
where the user may enter Address for Server to be configured.
• Address Specifies the address of the SNTP server. This is a text string of up to 64
characters containing the encoded unicast IP address or hostname of a SNTP
server. Unicast SNTP requests will be sent to this address. If this address is a
DNS hostname, then that hostname should be resolved into an IP address each
time a SNTP request is sent to it.
• Address Type Specifies the address type of the configured SNTP Server address. Allowed type
is :
• IPV4
Default value is Unknown
• Port Specifies the port on the server to which SNTP requests are to be sent. Allowed
range is (1 to 65535).
Default value is 123.
• Priority Specifies the priority of this server entry in determining the sequence of servers
to which SNTP requests will be sent. The client continues sending requests to
different servers until a successful response is received or all servers are
exhausted. This object indicates the order in which to query the servers. A server
entry with a precedence of 1 will be queried before a server with a priority of 2,
and so forth. If more than one server has the same priority then the requesting
order will follow the lexicographical ordering of the entries in this table. Allowed
range is (1 to 3).
Default value is 1.