PLANET WGS3-24240 User Manual

Page 320

Advertising
background image

User’s Manual of WGS3-24000 / WGS3-24240

320

Time

selected interface.

• Robustness

The robustness parameter for the selected interface. This variable allows tuning

for the expected packet loss on a subnet. If a subnet is expected to be lossy, the

robustness variable may be increased. IGMP is robust to (robustness variable-1)

packet losses.

• Startup Query Interval

The interval at which startup queries are sent on the selected interface.

• Startup Query Count

The number of queries to be sent on startup.

• Last Member Query

Interval

The last member query interval. The last member query interval is the maximum

response time inserted into group-specific queries sent in response to leave

group messages, and is also the amount of time between group-specific query

messages. This value may be tuned to modify the leave latency of the network. A

reduced value results in reduced time to detect the loss of the last member of a

group. This value is not used for IGMP version 1.

• Last Member Query

Count

The number of queries to be sent on receiving a leave group report.

Figure 4-6-59 IGMP Configuration Summary

Object

Description

• Querier

The address of the IGMP querier on the IP subnet to which the selected interface

is attached.

• Querier Status

Indicates whether the selected interface is in querier or non querier mode.

• Querier Up Time

The time in seconds since the IGMP interface querier was last changed.

Advertising
This manual is related to the following products: