PLANET WGS3-24240 User Manual

Page 243

Advertising
background image

User’s Manual of WGS3-24000 / WGS3-24240

243

• Encapsulation Type

Select the link layer encapsulation type for packets transmitted from the specified

interface from the pulldown menu. The possible values are Ethernet and SNAP.

The default is Ethernet.

• Proxy Arp

Select to disable or enable proxy Arp for the specified interface from the pulldown

menu.

• IP MTU

Specifies the maximum transmission unit (MTU) size of IP packets sent on an

interface. Valid range is (68 to 1500).

Default value is 1500.

• Submit button

Update the switch with the values on this screen. If you want the switch to retain

the new values across a power cycle, you must perform a save.

• Delete IP Address

button

Delete the IP Address from the interface. Note that the address can not be

deleted if there are secondary addresses configured.

• Secondary IP Address

button

Proceed to the Secondary IP Address configuration screen.

Non-Configurable Data

Object

Description

• Administrative Mode

The Administrative Mode of the interface.

The default value is enable.

• Active State

The state of the specified interface is either Active or Inactive. An interface is

considered active if it the link is up and it is in forwarding state.

• MAC Address

The burned-in physical address of the specified interface. The format is six

two-digit hexadecimal numbers separated by colons, for example

00:06:29:32:81:40.

Advertising
This manual is related to the following products: