PLANET WGS3-24240 - Manual (Page 439)

User’s Manual of WGS3-24000 / WGS3-24240
439
Interface Config (for a specific interface)
9.7 Show Commands
The 'show' command set is used in DiffServ to display configuration and status information for:
。 Classes
。 Policies
。 Services
This information can be displayed in either summary or detailed formats. The status information is only shown when the DiffServ
administrative mode is enabled; it is suppressed otherwise.
There is also a 'show' command for general DiffServ information that is available at any time.
9.7.1 show class-map
This command displays all configuration information for the specified class. The <classname> is the name of an existing
DiffServ class.
。 Format show class-map [<classname>]
。 Mode Privileged EXEC and User EXEC
If the Class Name is specified the following fields are displayed:
▫ Class Name - The name of this class.
▫ Class Type - The class type (all, any, or acl) indicating how the match criteria are evaluated for this class. A class type of
all means every match criterion defined for the class is evaluated simultaneously they must all be true to indicate a class
match. For a type of any each match criterion is evaluated sequentially and only one need be true to indicate a class
match. Class type acl rules are evaluated in a hybrid manner, with those derived from each ACL Rule grouped and
evaluated simultaneously, while each such grouping is evaluated sequentially.
▫ Match Criteria - The Match Criteria fields will only be displayed if they have been configured. They will be displayed in the
order entered by the user. These are evaluated in accordance with the class type. The possible Match Criteria fields are:
Class of Service, Destination IP Address, Destination Layer 4 Port, Destination MAC Address, Every, IP DSCP, IP
Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, Source Layer 4 Port, Source MAC
Address, and VLAN.
▫ Values - This field displays the values of the Match Criteria.
▫ Excluded - This field indicates whether or not this Match Criteria is excluded.
If the Class Name is not specified, this command displays a list of all defined DiffServ classes. The following fields are
displayed:
▫ Class Name - The name of this class. (Note that the order in which classes are displayed is not necessarily the same
order in which they were created.)
▫ Class Type - The class type (all, any, or acl) indicating how the match criteria are evaluated for this class. A class type of
all means every match criterion defined for the class is evaluated simultaneously they must all be true to indicate a class
match.For a type of any each match criterion is evaluated sequentially and only one need be true to indicate a class
match. Class type acl rules are evaluated in a hybrid manner, with those derived from each ACL Rule grouped and
evaluated simultaneously, while each such grouping is evaluated sequentially.
▫ ACL Number - The ACL number used to define the class match conditions at the time the class was created. This field is