PLANET WGS3-24240 - Manual (Page 281)

User’s Manual of WGS3-24000 / WGS3-24240
281
For the first time to create the OSPF Virtual Link, please via Console or telnet – the CLI interface to
set up.
(config)# router ospf
(config-router)# area 0.0.0.1 virtual-link 10.0.0.2
4.6.4.11 OSPF Virtual Link Summary
Figure 4-6-28 OSPF Virtual Link Summary
Non-Configurable Data
Object Description
• Area ID The ID of an OSPF area to which one of the router interfaces is connected. An
Area ID is a 32 bit integer in dotted decimal format that uniquely identifies the
area to which an interface is connected.
• Neighbor Router ID The input neighbor Router ID
• Hello Interval The configured hello interval for the OSPF virtual interface.
• Dead Interval The configured dead interval for the OSPF virtual interface.
• Retransmit Interval The configured retransmit interval for the OSPF virtual interface.
• Iftransit Delay Interval The configured transit delay for the OSPF virtual interface.
• Refresh button Refresh the data on the screen with the present state of the data in the switch.