PLANET WGS3-24240 - Manual (Page 442)

User’s Manual of WGS3-24000 / WGS3-24240
442
▫ Random Drop Sampling Rate - This field displays the RED sampling rate. This is not displayed if the queue depth
management scheme is not RED.
▫ Random Drop Decay Exponent - This field displays the RED decay exponent. This is not displayed if the queue depth
management scheme is not RED.
If the Policy Name is not specified this command displays a list of all defined DiffServ policies. The following fields are
displayed:
▫ Policy Name - The name of this policy. (Note that the order in which the policies are displayed is not necessarily the same
order in which they were created.)
▫ Policy Type - The policy type, namely whether it is an inbound or outbound policy definition.
▫ Class Members - List of all class names associated with this policy.
9.7.4 show diffserv service
This command displays policy service information for the specified interface and direction. The <slot/port> parameter specifies
a valid slot number and port number for the system. The direction parameter indicates the interface direction of interest.
▫ Format show diffserv service <slot/port> {in | out}
▫ Mode Privileged EXEC
▫ DiffServ Admin Mode - The current setting of the DiffServ administrative mode. An attached policy is only in effect on an
interface while DiffServ is in an enabled mode.
▫ Interface - The slot number and port number of the interface (slot/port).
▫ Direction - The traffic direction of this interface service, either in or out.
▫ Operational Status - The current operational status of this DiffServ service interface.
▫ Policy Name - The name of the policy attached to the interface in the indicated direction.
▫ Policy Details - Attached policy details, whose content is identical to that described for the show policy-map
<policymapname> command (content not repeated here for brevity).
9.7.5 show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been attached. The direction parameter is
optional; if specified, only services in the indicated direction are shown, otherwise service information is shown for both
directions, where applicable.
▫ Format show diffserv service brief [in | out]
▫ Mode Privileged EXEC
▫ DiffServ Mode - The current setting of the DiffServ administrative mode. An attached policy is only active on an interface
while DiffServ is in an enabled mode.
The following information is repeated for interface and direction (only those interfaces configured with an attached policy are
shown):
Interface - The slot number and port number of the interface (slot/port).
Direction - The traffic direction of this interface service, either in or out.
OperStatus - The current operational status of this DiffServ service interface.
Policy Name - The name of the policy attached to the interface in the indicated direction.