PLANET WGS3-24240 - Manual (Page 390)

User’s Manual of WGS3-24000 / WGS3-24240
390
8.6.5 deleteport
This command deletes the port from the port-channel (LAG). The interface is a logical slot and port number of a configured
port-channel.
▫ Format deleteport <logical slot/port>
▫ Mode Interface Config
8.6.6 macfilter
This command adds a static MAC filter entry for the MAC address <macaddr> on the VLAN <vlanid>. The <macaddr>
parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The restricted MAC Addresses are: 00:00:00:00:00:00, 01:80:C2:00:00:00 to 01:80:C2:00:00:0F, 01:80:C2:00:00:20 to
01:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF.
The <vlanid> parameter must identify a valid VLAN.
Up to 100 static MAC filters may be created.
▫ Format macfilter <macaddr> <vlanid>
▫ Mode Global Config
8.6.6.1 no macfilter
This command removes all filtering restrictions and the static MAC filter entry for the MAC address <macaddr> on the VLAN
<vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫ Format no macfilter <macaddr> <vlanid>
▫ Mode Global Config
8.6.7 macfilter adddest
This command adds the interface to the destination filter set for the MAC filter with the given <macaddr> andVLAN of <vlanid>.
The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫ Format macfilter adddest <macaddr> <vlanid>
▫ Mode Interface Config
8.6.7.1 no macfilter adddest
This command removes a port from the destination filter set for the MAC filter with the given <macaddr> and VLAN of <vlanid>.
The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫ Format no macfilter adddest <macaddr> <vlanid>
▫ Mode Interface Config