PLANET WGS3-24240 - Manual (Page 443)

User’s Manual of WGS3-24000 / WGS3-24240
443
9.7.6 show policy-map interface
This command displays policy-oriented statistics information for the specified interface and direction. The <slot/port> parameter
specifies a valid slot number and port number for the system. The direction parameter indicates the interface direction of
interest.
"
Note : This command is only allowed while the DiffServ administrative mode is enabled.
▫ Format show policy-map interface <slot/port> <in | out>
▫ Interface - The slot number and port number of the interface (slot/port).
▫ Direction - The traffic direction of this interface service, either in or out.
▫ Operational Status - The current operational status of this DiffServ service interface.
▫ Policy Name - The name of the policy attached to the interface in the indicated direction.
▫ Interface Offered Octets/Packets - A cumulative count of the octets/packets offered to this service interface in the
specified direction before the defined DiffServ treatment is applied.
▫ Interface Discarded Octets/Packets - A cumulative count of the octets/packets discarded by this service interface in the
specified direction for any reason due to DiffServ treatment.
▫ Interface Sent Octets/Packets - A cumulative count of the octets/packets forwarded by this service interface in the
specified direction after the defined DiffServ treatment was applied. In this case, forwarding means the traffic stream was
passed to the next functional element in the data path, such as the switching or routing function or an outbound link
transmission element.
The following information is repeated for each class instance within this policy:
▫ Class Name - The name of this class instance.
▫ In Offered Octets/Packets - A count of the octets/packets offered to this class instance before the defined DiffServ
treatment is applied. Only displayed for the 'in' direction.
▫ In Discarded Octets/Packets - A count of the octets/packets discarded for this class instance for any reason due to
DiffServ treatment of the traffic class. Only displayed for the 'in' direction.
▫ Tail Dropped Octets/Packets - A count of the octets/packets discarded due to tail dropping from a transmission queue,
typically due to the effects of traffic shaping. These counts may not be supported on all platforms. Only displayed for the
'out' direction.
▫ Random Dropped Octets/Packets - A count of the octets/packets discarded due to WRED active queue depth
management, typically due to the effects of traffic shaping. These counts are only applicable for a class instance whose
policy attributes includes random dropping, and may not be supported on all platforms. Only displayed for the 'out'
direction.
▫ Shape Delayed Octets/Packets - A count of the octets/packets that were delayed due to traffic shaping. These counts
are only applicable for a class instance whose policy attributes includes shaping, and may not be supported on all
platforms. Only displayed for the 'out' direction.
▫ Sent Octets/Packets - A count of the octets/packets forwarded for this class instance after the defined DiffServ treatment
was applied. In this case, forwarding means the traffic stream was passed to the next functional element in the data path,
such as the switching or routing function or an outbound link transmission element. Only displayed for the 'out' direction.
"
Note : None of the counters listed here are guaranteed to be supported on all platforms. Only supported counters