7 show ip dvmrp nexthop, 8 show ip dvmrp prune – PLANET WGS3-24240 User Manual

Page 539

Advertising
background image

User’s Manual of WGS3-24000 / WGS3-24240

539

Received Routes

This shows the number of routes received from the neighbor.

Rcvd Bad Pkts

This field displays the number of invalid packets received from this neighbor.

Rcvd Bad Routes

This field displays the number of correct packets received with invalid routes.


13.2.7 show ip dvmrp nexthop

This command displays the next hop information on outgoing interfaces for routing multicast datagrams.

Format show ip dvmrp nexthop

Modes Privileged EXEC User EXEC

Source IP

This field displays the sources for which this entry specifies a next hop on an outgoing

interface.

Source Mask

This field displays the IP Mask for the sources for which this entry specifies a next hop on

an outgoing interface.

Next Hop Interface

This field displays the interface in unit/slot/port format for the outgoing interface for this

next hop.

Type

This field states whether the network is a LEAF or a BRANCH.

13.2.8 show ip dvmrp prune

This command displays the table listing the router’s upstream prune information.

Format show ip dvmrp prune

Mode

Privileged EXEC and User EXEC

Group IP

This field identifies the multicast Address that is pruned.

Source IP

This field displays the IP Address of the source that has pruned.

Source Mask

This field displays the network Mask for the prune source. It should be all 1s or both the

prune source and prune mask must match.

Expiry Time (secs)

This field indicates the expiry time in seconds. This is the time remaining for this prune to

age out.

Advertising
This manual is related to the following products: