PLANET WGS3-24240 User Manual

Page 251

Advertising
background image

User’s Manual of WGS3-24000 / WGS3-24240

251

4.6.3.3 RIP Interface Configuration

Figure 4-6-11 RIP Interface Configuation

Selection Criteria

Object

Description

• Slot/Port

Select the interface for which data is to be configured.

Configurable Data

Object

Description

• Send Version

Select the version of RIP control packets the interface should send from the

pulldown menu. The value is one of the following:

•

RIP-1 - send RIP version 1 formatted packets via broadcast.

•

RIP-1c - RIP version 1 compatibility mode. Send RIP version 2

formatted packets via broadcast.

•

RIP-2 - send RIP version 2 packets using multicast.

•

None - no RIP control packets will be sent.

The default is RIP-2.

• Receive Version

Select what RIP control packets the interface will accept from the pulldown menu.

The value is one of the following:

•

RIP-1 - accept only RIP version 1 formatted packets.

•

RIP-2 - accept only RIP version 2 formatted packets.

Advertising
This manual is related to the following products: