PLANET WGS3-24240 User Manual
Page 307
User’s Manual of WGS3-24000 / WGS3-24240
307
• Router Version Errors
The total number of VRRP packets received with an unknown or unsupported
version number.
• Router VRID Errors
The total number of VRRP packets received with an invalid VRID for this virtual
router.
• VRID
The VRID for the selected Virtual Router.
• Slot/Port
The Slot/Port for the selected Virtual Router.
• Up Time
The time, in days, hours, minutes and seconds, that has elapsed since the virtual
router transitioned to the initialized state.
• State Transitioned to
Master
The total number of times that this virtual router's state has transitioned to
Master.
• Advertisement
Received
The total number of VRRP advertisements received by this virtual router.
• Advertisement Interval
Errors
The total number of VRRP advertisement packets received for which the
advertisement interval was different than the one configured for the local virtual
router .
• Authentication Failure
The total number of VRRP packets received that did not pass the authentication
check.
• IP TTL Errors
The total number of VRRP packets received by the virtual router with IP TTL
(Time-To-Live) not equal to 255.
• Zero Priority Packets
Received
The total number of VRRP packets received by the virtual router with a priority of
'0'.
• Zero Priority Packets
Sent
The total number of VRRP packets sent by the virtual router with a priority of '0'.
• Invalid Type Packets
Received
The number of VRRP packets received by the virtual router with an invalid value
in the 'type' field.
• Address List Errors
The total number of packets received for which the address list does not match
the locally configured list for the virtual router.
• Invalid Authentication
Type
The total number of packets received with an unknown authentication type.
• Authentication Type
Mismatch
The total number of packets received with an authentication type different to the
locally configured authentication method.
• Packet Length Errors
The total number of packets received with a packet length less than the length of
the VRRP header.
• Refresh button
Refresh the data on the screen with the present state of the data in the switch.