PLANET WGS3-24240 - Manual (Page 532)

User’s Manual of WGS3-24000 / WGS3-24240
532
13.1.11 show ip mcast mroute
This command displays a summary or all the details of the multicast table.
▫ Format show ip mcast mroute {detail | summary}
▫ Modes Privileged EXEC User EXEC
If the “detail” parameter is specified, the following fields are displayed:
Source IP Addr This field displays the IP address of the multicast data source.
Group IP Addr This field displays the IP address of the destination of the multicast packet.
Expiry Time This field displays the time of expiry of this entry in seconds.
Up Time This field displays the time elapsed since the entry was created in seconds.
RPF Neighbor This field displays the IP address of the RPF neighbor.
Flags This field displays the flags associated with this entry.
If the “summary” parameter is specified, the following fields are displayed:
Source IP Addr This field displays the IP address of the multicast data source.
Group IP Addr This field displays the IP address of the destination of the multicast packet
Protocol This field displays the multicast routing protocol by which this entry was created.
Incoming Interface This field displays the interface on which the packet for this source/group arrives
Outgoing Interface List This field displays the list of outgoing interfaces on which this packet is forwarded.
13.1.12 show ip mcast mroute group
This command displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the entries in the multicast mroute table containing the given <groupipaddr>.
▫ Format show ip mcast mroute group <groupipaddr> {detail |summary}
▫ Modes Privileged EXEC User EXEC
Source IP Addr This field displays the IP address of the multicast data source.